Embedded Files
- Open The Software on the Desktop
Initial Setup on New Computer
Initial Setup on New Computer
Click 'Get Started'
Select 'North America'
Click 'Skip'
A. Click 'Clear all'
B. Select 0.4mm nozzle under the 'Bambu Lab X1 Carbon'
C. Press Submit
Select 'PLA'
Select 'Bambu Lab' and 'Generic'
Click on 'Bambu PLA Basic' and 'Generic PLA'
Check 'No' to the network plugin
Click 'Finish'
Click 'Skip this Version' to the software update dialogue
Everytime Setup
Everytime Setup
- Prepare
Click 'Prepare'
2. Import
2. Import
Click 'File'
Click 'Import'
Select 'Import 3MF.....'
3. File
3. File
Find your .stl file...
I do not know where you save your files (downloads, desktop, documents); Please do not ask me where YOU saved your own files.
4. Print Settings
4. Print Settings
Use the following print settings.
Overhangs
Overhangs
If your object has 90 degree overhangs that are unsupported. You need to enable SUPPORTS.
5. Supports
5. Supports
Only enable these settings if your part has 90 degree overhangs!
6. Slice
6. Slice
Click 'Slice'
7. SD Card
7. SD Card
Insert the SD card as shown.
8. Export
8. Export
9. Where?
9. Where?
10. Insert
10. Insert
Insert the SD card in the 3D printer
11. Print
11. Print
Check that the 3D Printer is CLEAR
Press....
Page updated
Google Sites
Report abuse